Attaching Pseudowire Classes to Pseudowires 247
Configuring Pseudowires Using Static Labels 249
Disabling a Virtual Forwarding Instance 251
Configuring the MAC Address-related Parameters 252
Configuring the MAC Address Source-based Learning 252
Enabling the MAC Address Withdrawal 254
Configuring the MAC Address Limit 256
Configuring the MAC Address Aging 258
Disabling MAC Flush at the Bridge Port Level 260
Configuring MAC Address Security 262
Configuring an Attachment Circuit to the AC Split Horizon Group 264
Adding an Access Pseudowire to the AC Split Horizon Group 265
Configuring VPLS with BGP Autodiscovery and Signaling 267
Configuring VPLS with BGP Autodiscovery and LDP Signaling 270
Configuring Service Path Preference 274
Setting a Forward Class in a Route Policy 274
Attaching a Route Policy at Table Policy Attach Point 274
Associating a TE Tunnel with Forward Class Index 275
Enabling Route Policy for L2VPN VPLS with BGP Autodiscovery 275
Enabling Route Policy for L2VPN VPWS with BGP Autodiscovery 277
Configuring G.8032 Ethernet Ring Protection 278
Configuring ERP Profile 279
Configuring CFM MEP 280
Configuring an ERP Instance 280
Configuring ERP Parameters 283
Configuring TCN Propagation 285
Configuring Flow Aware Transport Pseudowire 286
Enabling Load Balancing with ECMP and FAT PW for VPWS 286
Enabling Load Balancing with ECMP and FAT PW for VPLS 289
Configuring Pseudowire Headend 292
PWHE Configuration Restrictions 292
Configuring Generic Interface List 293
Configuring PWHE Interfaces 294
Configuring PWHE Crossconnect 295
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
xiii
Contents
To Next Page
Loading...
Need help?
General
