RP/0/RSP0/CPU0:router(config)# evpn
Enters EVPN configuration mode.
Step 3 (Optional) timers
Example:
RP/0/RSP0/CPU0:router(config-evpn)# timers
Configures global EVPN timers.
Step 4 (Optional) peering seconds
Example:
RP/0/RSP0/CPU0:router(config-evpn-timers)# peering 15
Configures the global peering timer. Default is 3 seconds. Range is 0 to 300 seconds.
Step 5 (Optional) recovery seconds
Example:
RP/0/RSP0/CPU0:router(config-evpn-timers)# recovery 30
Configures the global recovery timer. Default is 30 seconds. Range is 20 to 3600 seconds.
Step 6 exit
Example:
RP/0/RSP0/CPU0:router(config-evpn-timers)# exit
Exits the current configuration mode.
Step 7 interface Bundle-Ether bundle-id
Example:
RP/0/RSP0/CPU0:router(config-evpn)# interface Bundle-Ether1
Enters bundle interface configuration mode.
Step 8 ethernet-segment
Example:
RP/0/RSP0/CPU0:router(config-evpn-ac)# ethernet-segment
Enters the EVPN ethernet-segment configuration mode.
Step 9 identifier type esi-type esi-identifier
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
534
EVPN Features
Configuring EVPN Ethernet Segment
To Next Page
Loading...
Need help?
General
