Cisco A9K-SIP-700 Configuration Guidelines

Example:
RP/0/RSP0/CPU0:router(config-evpn-ac-es)# identifier type 0 40.00.00.00.00.00.00.00.01
Configures the Ethernet segment identifier (ESI) of an interface.
Step 10 load-balancing-mode single-active
Example:
RP/0/RSP0/CPU0:router(config-evpn-ac-es)# load-balancing-mode single-active
Specifies the load balancing mode.
Step 11 bgp route-target ipv4/v6-address
Example:
RP/0/RSP0/CPU0:router(config-evpn-ac-es)# bgp route-target 4000.0000.0001
Configures the BGP Import Route-Target for the Ethernet-Segment.
Step 12 (Optional) service-carving manual primary {isid} secondary {isid}
Example:
RP/0/RSP0/CPU0:router(config-evpn-ac-es)# service-carving manual primary 100 secondary 200
Specifies a list of service identifiers (isid) as active and standby services. The isid range is from 256 to 16777216.
Step 13 exit
Example:
RP/0/RSP0/CPU0:router(config-evpn-ac-es-man)# exit
Exits the current configuration mode.
Step 14 exit
Example:
RP/0/RSP0/CPU0:router(config-evpn-ac-es)# exit
Exits the current configuration mode.
Step 15 (Optional) mac-flush mvrp
Example:
RP/0/RSP0/CPU0:router(config-evpn-ac)# mac-flush mvrp
Specifies MAC flush mode for this Ethernet Segment.
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
535
EVPN Features
Configuring EVPN Ethernet Segment

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English