Use the touchscreen to configure the WLAN settings on Cisco Desktop Collaboration Experience.Note
For information about how to access the Wireless & Networks settings menu, see the Display Setup Menu,
on page 100.
Table 22: Wireless & Networks Settings Menu
To select or changeDescriptionOption
Toggle between OFF and ON to disable
or enable Wi-Fi connection. See the
Wi-Fi Settings Menu, on page 101
Enables or disables Wi-Fi. Sets up and
manages wireless access points.
Wi-Fi
Toggle between OFF and ON to disable
or enable Bluetooth. See the Bluetooth
Settings Menu, on page 103
Enables or disables Bluetooth. Sets up and
manages Bluetooth connections, device
names, and discoverability.
Bluetooth
Displays data usage by Wi-Fi and
Ethernet.
Data usage
See the TFTP Server Settings Menu, on
page 104
Sets up and manages TFTP server
information.
TFTP server settings
See the Ethernet Settings Menu, on page
105
Sets up and manages wired access.Ethernet settings
See the VPN Menu Options, on page
109
Sets up and manages Virtual Private
Networks (VPNs).
VPN
Allows you to reset the network settings
to factory defaults.
Reset network settings
Wi-Fi Settings Menu
The following table describes the Wi-Fi settings and, where applicable, explains how to change them.
Table 23: Wi-Fi Settings Menu
To select or changeDescriptionOption
Wi-Fi settings
Tap to enable or disable Wi-Fi connection.Enables or disables Wi-Fi.Wi-Fi
Tap a network to access it.Displays Wi-Fi networks.List of WI-Fi
networks
Cisco Desktop Collaboration Experience DX650 Administration Guide, Release 10.1(1)
101
Wireless and Networks Settings Menu
To Next Page
Loading...
Need help?
General
