for your end users. You must provide as much information as possible to ensure that they can successfully
access and use the User Options web pages.
Make sure to provide end users with the following information about the User Options web pages:
•
The URL required to access the application. This URL is:
http://<server_name:portnumber>/ccmuser/, where server_name is the host on which
the web server is installed.
•
A user ID and default password are needed to access the application.
These settings correspond to the values you entered when you added the user to Cisco Unified
Communications Manager (see Reset Options and Load Upgrades, on page 148).
•
A brief description of what a web-based, graphical user interface application is, and how to access it
with a web browser.
•
An overview of the tasks that users can accomplish by using the web page.
User Voice Messaging System Access
Cisco Unified Communications Manager lets you integrate with many different voice messaging systems,
including the Cisco Unified Communications Manager voice messaging system. Because you can integrate
with a variety of systems, you must provide users with information about how to use your specific system.
Provide this information to each user:
•
How to access the voice messaging system account.
Make sure that you have used Cisco Unified Communications Manager to configure
the Primary and Backup Voice Mail Server.
Note
•
Initial password for accessing the voice messaging system.
Make sure that you have configured a default voice messaging system password for all users.
•
How Cisco Desktop Collaboration Experience indicates that voice messages are waiting.
•
Make sure that you have used Cisco Unified Communications Manager to set up a message waiting
indicator (MWI) method.
Cisco Desktop Collaboration Experience DX650 Administration Guide, Release 10.1(1)
209
User Voice Messaging System Access
To Next Page
Loading...
Need help?
General
