To changeDescriptionOption
1
Tap Use static IP to enable.
2
Select Domain name.
3
Enter domain name.
4
Tap OK.
Name of the Domain Name System
(DNS) in which Cisco Desktop
Collaboration Experience resides.
Domain name
You can send multiple
domain names to Cisco
Desktop Collaboration
Experience using option 15.
Each domain name needs
to be delimited by a space.
Any other delimiter, such
as a comma, is not
supported. The domain
names can also be entered
manually if using a static
IP address. Again, only the
space is a valid delimiter.
Currently option 119 is not
supported.
Note
1
Tap Use static IP to enable.
2
Select DNS 1 and then enter
a new DNS server IP address.
3
Tap OK.
4
Repeat Steps 2 and 3 as
needed to assign backup DNS
server.
Primary Domain Name System
(DNS) server (DNS server 1) and
optional backup DNS server (DNS
server 2) used by Cisco Desktop
Collaboration Experience.
DNS 1
DNS 2
VPN Menu Options
Use this procedure to configure VPN on Cisco Desktop Collaboration Experience.
For information about VPN configuration from Cisco Unified Communications Manager, see Configure
VPN From Cisco Unified Communications Operating System Administration Guide, on page 131.
Note
Procedure
Step 1
Access the VPN Settings menu from the home screen by choosing Settings > More > VPN.
Step 2
Tap Add VPN network.
Step 3
Enter Description and Server Address.
Step 4
Select Save.
Cisco Desktop Collaboration Experience DX650 Administration Guide, Release 10.1(1)
109
Wireless and Networks Settings Menu
To Next Page
Loading...
Need help?
General
