DescriptionItem
Number of received data packets droppedrx_packets_dropped
Number of transmitted data packet errorstx_packet_errors
Number of received data packet errorsrx_packet_errors
Number of frames transmittedTx frames
Number of frames transmitted as broadcast or multicasttx_multicast_frames
Number of messages retransmitted a single time being acknowledged by
the receiving device
tx_retry
Number of transmit retries prior to successtx_multi_retry
Number of frames that failed to be transmittedtx_failure
A corresponding CTS was receivedrts_success
rts_failure
Access Point did not acknowledge a transmissionack_failure
Number of multicast packets transmittedrx_multicast_frames
Number of duplicate multicast packets transmittedrx_duplicate_frames
Number of fragmented packets receivedrx_fragmented_packets
Number of Frame Checksum (FCS) errorsFCS Error
Number of times roamed from current access pointroaming_count
Call Statistics (Audio) Screen
You can access the Call statistics (audio) screen on Cisco Desktop Collaboration Experience to display
counters, statistics, and voice-quality metrics for the most recent call.
You can also remotely view the call statistics information by using a web browser to access the Streaming
Statistics web page. This web page contains additional RTP Control Protocol (RTCP) statistics that are
not available on Cisco Desktop Collaboration Experience. For more information about remote monitoring,
see Remote Monitoring, on page 179.
Note
A single call can have multiple voice streams, but data is captured for only the last voice stream. A voice
stream is a packet stream between two endpoints. If one endpoint is put on hold, the voice stream stops even
Cisco Desktop Collaboration Experience DX650 Administration Guide, Release 10.1(1)
175
Status Menu