Configuration referenceDescriptionFeature
Requires no configuration.Allows users to redirect connected calls from
their Cisco Desktop Collaboration
Experience device to another number.
The user can connect two calls to each other.
The user can remain on the line or transfer
the call without staying on line.
Transfer
For more information, see the Cisco
Desktop Collaboration Experience
DX600 Series User Guide.
Cisco Desktop Collaboration Experience
users can toggle video off or on during video
calls by selecting the Enable/Disable Video
call option from the phone application menu.
The Video Toggle On/Off icon appears in
the menu bar when the menu key is pressed.
Video Toggle
On/Off
For more information see:
•
Cisco Unified Communications
Manager Features and Services
Guide
•
Cisco Unified Communications
Manager System Guide, Voice
Mail Connectivity to Cisco Unified
Communications Manager chapter.
•
Set Up Visual Voicemail, on page
137.
Enables callers to leave messages if calls are
unanswered.
Voice Messaging
System
Configure Product-Specific Options
Cisco Unified Communications Manager Administration allows you to set some product-specific configuration
parameters for Cisco Desktop Collaboration Experience phones in any of the following windows:
•
Enterprise Phone Configuration window (System > Enterprise Phone Configuration)
•
Common Phone Profile window (Device > Device Settings > Common Phone Profile), in the Product
Specific Configuration Layout portion of window
•
Device Phone Configuration window (Device > Phone > Add New > Cisco DX650), in the Product
Specific Configuration Layout portion of window
The following table shows the product-specific configuration options.
Cisco Desktop Collaboration Experience DX650 Administration Guide, Release 10.1(1)
123
Configure Product-Specific Options
To Next Page
Loading...
Need help?
General
