Table 29: Cisco Desktop Collaboration Experience DX600 Series Product-Specific Configuration Options
DefaultDescriptionFeature
FalseDisables only the speakerphone functionality.
Disabling speakerphone functionality does not
affect the headset. You can use lines and speed
dials with headset/handset.
Disable Speakerphone
FalseDisables all speakerphone functions and the
headset microphone.
Disable Speakerphone
and Headset
FalseDisables the USB ports on the device and dock.Disable USB
DisabledIndicates whether the SDIO device on the
device is enabled or disabled.
SDIO
EnabledIndicates whether the Bluetooth service on the
device is enabled or disabled.
Bluetooth
Typically Saturday and Sunday for
U.S. corporate customers.
The list contains all of the
days of the week. To turn
off backlight on Saturday
and Sunday hold down
Control and select Saturday
and Sunday.
Note
Allows the user to specify the days that the
backlight is to remain off by default.
Days Display Not
Active
07:30
Maximum length: 5
Enter value in a 24-hour
format, where 00:00 is the
beginning of the day and
23:59 is the end of the day.
Note
Indicates the time of day the display is to
automatically turn itself on for days listed in
the off schedule.
Display On Time
10:30
Maximum length: 5
Maximum value is 24
hours. This value is in
hours and minutes format.
For example, “01:30”
activates the display for 1
hour and 30 minutes.
Note
Indicates the amount of time the display is to
be active when it is turned on by the
programmed schedule.
Display On Duration
EnabledWhen the device is in screen saver mode, this
will turn the display on when a call is ringing.
Display On When
Incoming Call
Cisco Desktop Collaboration Experience DX650 Administration Guide, Release 10.1(1)
124
Configure Product-Specific Options
To Next Page
Loading...
Need help?
General
