To changeDescriptionOption
Choose Device > Device Settings >
Product Specific Configuration.
Set Allow User Defined Profiles to On or
Off.
Available for multilevel
configurations. Administrator
may change at device, common,
or enterprise levels.
If the feature is disabled on the
Cisco Unified Communications
Manager, user-defined VPN
profiles are removed from the list
on Cisco Desktop Collaboration
Experience and Add New VPN
Connection is disabled.
Note
Shows whether option is enabled or
disabled.
User Defined VPN
Profiles
Choose Device > Device Settings >
Common Phone Profile.
Select the desired profile.
Set Always Require VPN to On or Off.
Always Require VPN setting
overwrites enable and
autoNetworkDetect values to
True.
Note
Shows whether option is enabled or
disabled.
Always Require VPN
Network configuration changes can potentially affect an active VPN connection.
If VPN is enabled, no proxy will be configured or used for VPN.
Note
VPN Authentication
Cisco Desktop Collaboration Experience supports the following VPN authentication methods:
•
Username and password
•
Certificate only
•
Password only
Cisco Desktop Collaboration Experience DX650 Administration Guide, Release 10.1(1)
133
Configure Product-Specific Options
To Next Page
Loading...
Need help?
General
