Cisco DX650 Administration Guide

Cisco Unified Communications Manager Administration also provides several service parameters that
you can use to configure various telephony functions. For more information about accessing and configuring
service parameters, see the Cisco Unified Communications Manager Administration Guide. For more
information about the functions of a service, click on the name of the parameter or the question mark help
button in the Service Parameter Configuration window.
Note
Table 28: Telephony Features for Cisco Desktop Collaboration Experience
Configuration referenceDescriptionFeature
•
For more information, see the
Cisco Desktop Collaboration
Experience DX600 Series User
Guide.
•
Requires no configuration.
Allows a user to view a list of active and
held calls, sorted in chronological order
(oldest first), and incoming and completed
calls, sorted newest to oldest
All Calls
Requires no configuration.Allows the Cisco Desktop Collaboration
Experience user to choose from matching
numbers in the Recent Call History, which
includes placed, received, and missed calls.
To place the call, the user can choose a
number from any of these call lists or
continue to enter digits manually.
Auto Dial
For more information, see:
•
Cisco Unified Communications
Manager Administration Guide,
Cisco Unified IP Phone
Configuration chapter.
•
Cisco Unified Communications
Manager System Guide, Cisco
Unified IP Phone chapter.
•
Cisco Unified Communications
Manager Features and Services
Guide, Barge and Privacy chapter.
•
Cisco Unified Communications
Manager Administration Guide,
Feature Control Policy
Configuration chapter.
Allows a user to join a nonprivate call on a
shared phone line. Barge adds a user to a call
and converts the call into a conference,
allowing the user and other parties to access
conference features.
Cisco Desktop Collaboration
Experience users can still use barge
after the Built In Bridge Enable
service parameter is set to Off. To
prevent a user from using the Barge
feature on Cisco Desktop
Collaboration Experience, you must
disable Barge in the Feature Control
Policy for the Cisco Desktop
Collaboration Experience device.
Note
Barge
Cisco Desktop Collaboration Experience DX650 Administration Guide, Release 10.1(1)
114
Telephony Features Available

Cisco DX650 Specifications

General

Resolution	800 x 480 pixels
Audio	Wideband audio
USB Ports	2 x USB 2.0
Display	7-inch capacitive touchscreen
Camera	HD 720p
Connectivity	Ethernet, Wi-Fi
Bluetooth	Yes
SIP Protocol	Supported
Speakerphone	Full-duplex
Headset Jack	3.5 mm
Network Interfaces	10/100/1000 Ethernet
Supported Protocols	SIP
Codecs	G.722
Power over Ethernet (PoE)	Yes, IEEE 802.3af
Weight	2.2 lbs