The User Device Association window appears.
Step 5
Enter the appropriate search criteria and click Find.
Step 6
Choose the device that you want to associate with the user by checking the check box to the left of the device.
Step 7
Click Save Selected/Changes to associate the device with the user.
Make sure to provide users with the following information about the User Options web pages:
•
The URL required to access the application. This URL is:
http://<server_name:portnumber>/ccmuser/, where server_name is the host on which
the web server is installed.
•
A user ID and default password are needed to access the application.
These settings correspond to the values you entered after you added the user to Cisco Unified
Communications Manager (see the Reset Options and Load Upgrades, on page 148).
For additional information, see:
•
User Group Configuration, Cisco Unified Communications Manager Administration Guide
•
End User Configuration, Cisco Unified Communications Manager Administration Guide
•
Role Configuration, Cisco Unified Communications Manager Administration Guide
Cisco Desktop Collaboration Experience DX650 Administration Guide, Release 10.1(1)
152
Manage the User Options Web Pages
To Next Page
Loading...
Need help?
General
