Cisco SPA301 User Manual

Customizing Standard Features
Configuring XML Services
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 105
3
XML Applications
When authentication is required for CGI/Execute URL via Post from external
application (Example: Web Application) to the SPA phones, the parameter, "CISCO
XML EXE Auth Mode” is used in 3 different scenarios:
• Trusted—No authentication is performed (local user password is set or not).
This is the default.
• Local Credential—Authentication based on digest authentication using
local user password, if the local user password is set. If not, no
authentication.
• Remote Credential—Authentication based on digest authentication using
remote username/password as set in XML application on Web Page (to
access XML application server).
Macro Variables
You can use macro variables in XML URLs. The following macro variables are
supported:
• User ID—UID1, UID2 to UIDn
• Display name—DISPLAYNAME1, DISPLAYNAME2 to DISPLAYNAMEn
• Auth ID—AUTHID1, AUTHID2 to AUTHIDn
• Proxy—PROXY1, PROXY2 to PROXYn
• MAC Address using lower case hex digits—MA
• Product Name—PN
• Product Series Number—PSN
• Serial Number—SERIAL_NUMBER
The following table shows the list of macros supported on the SPA phones:

Cisco SPA301 Specifications

General

Brand	Cisco
Model	SPA301
Category	IP Phone
Language	English