Customizing Standard Features
Configuring Voice Mail and Message Waiting Settings
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 68
3
Enabling Service Announcements
Service Announcements allows a user to send announcement requests to a
customer-supplied announcement server. (Not applicable to the Cisco WIP310.)
To configure Service Announcements, navigate to Admin Login > advanced >
Voice > Phone. Under Supplementary Services, in the Service Annc Serv list,
choose yes to enable.
For more information see Vertical Service Announcement Codes
(Cisco SPA300 Series and Cisco SPA500 Series) for detailed configuration.
Configuring Voice Mail and Message Waiting Settings
Configuring Voice Mail
This configures the internal or external phone number or URL for the the voice mail
system. If you are using an external voice-mail service, the number must include
any digits required to dial out and any required area code.
To configure the phone to connect to voice mail:
STEP 1 Click Admin Login > advanced > Voice > Phone
STEP 2 Under General, enter the Voice Mail Number.
STEP 3 (Optional) Enter the Voice Mail Subscribe Interval; the expiration time in seconds,
of a subscription to a voice mail server.
STEP 4 Click Submit All Changes. The phone reboots.
Configuring Internal Voice Mail for Each Extension (Using a
Cisco SPA400)
To configure internal voice mail, navigate to Admin Login > advanced > Voice >
Ext n. Under Call Feature Settings, enter the voice mail line number and phone
extension in the Mailbox ID field. For example, 2101 indicates that the Cisco
SPA400 voice mail server is configured on the Cisco SPA9000 Line 2, phone
extension 101.
To Next Page
Loading...
Need help?
General
