Customizing Standard Features
Configuring Ring Tones
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 83
3
To delete a ring tone from a phone:
STEP 1 Open the Ring Tone Utility.
STEP 2 Enter the IP address of the phone.
STEP 3 Click the Delete button next to the ring tone you want to delete.
STEP 4 Click OK.
STEP 5 Close the Ring Tone Utility windows.
Assigning a Ring Tone to an Extension
To assign a ring tone to an extension:
STEP 1 Click Admin Login > advanced > Voice > Ext Ext <number> tab.
STEP 2 Under Call Feature Settings in the Default Ring field, choose from the following:
• No Ring
• 1 through 12
• User 1
• User 2
STEP 3 Click Submit All Changes.
To Next Page
Loading...
