Cisco SPA301 User Manual

Cisco SPA IP Phone Field Reference
Phone Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 316
A
LDAP Corporate Directory Search
If using Active Directory with authentication set to MD5, you must first configure
the following:
• Click the System tab. In the Optional Network Configuration section, under
Primary DNS, enter the IP address of the DNS server.
• In the Optional Network Configuration section, under Domain, enter the
Lightweight Directory Access Protocol (LDAP) domain.
NOTE Does not apply to the Cisco WIP310, Cisco SPA301, or Cisco SPA501G.
Parameter Description
LDAP Dir Enable Choose yes to enable LDAP.
LDAP Corp Dir Name Enter a free-form text name, such as “Corporate
Directory.”
LDAP Server Enter a fully qualified domain name or IP address of
LDAP server, in the following format:
nnn.nnn.nnn.nnn
LDAP Auth Method Select the authentication method that the LDAP server
requires. Choices are:
None—No authentication is used between the client
and the server.
Simple—The client sends its fully-qualified domain
name and password to the LDAP server. Might present
security issues.
Digest-MD5—The LDAP server sends authentication
options and a token to the client. The client returns an
encrypted response that is decrypted and verified by
the server.

Cisco SPA301 Specifications

General

Brand	Cisco
Model	SPA301
Category	IP Phone
Language	English