Customizing Standard Features
Configuring Bluetooth (Cisco SPA525G or Cisco SPA525G2 only)
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 90
3
STEP 9 Scroll to PIN and enter the PIN for your Bluetooth headset.
STEP 10 Scroll to Connect Automatically and press the Right Arrow key to turn to On.
STEP 11 Press Connect. The profile screen displays and a check mark appears next to the
headset if the connection was successful.
Pairing Your Cisco SPA525G2 with a Bluetooth-Enabled
Mobile Phone
This feature is based on the following standard Bluetooth profiles:
• Phone Book Access Profile 1.0
• Handsfree Profile 1.5
• Handset Profile 1.1
Make sure your mobile phone provides support for one of the above profiles.
Cisco provides a reference list of Bluetooth-enabled mobile phones supported
with the Cisco SPA525G2. See the Cisco support community at
http://www.cisco.com/go/smallbizsupport and consult the latest
Cisco SPA525G2 release notes, available at cisco.com.
For more detailed instructions, see the
Cisco Small Business Cisco SPA525G or
Cisco SPA525G2 IP Phone User Guides
.
To pair your Cisco SPA525G2 with your Bluetooth-enabled mobile phone, you can
either initiate pairing from the Cisco SPA525G2, or from your mobile phone.
Initiating Pairing from the Cisco SPA525G2
STEP 1 Enable Bluetooth as described in Enabling Bluetooth from the Web Interface.
STEP 2 Press the Setup button.
STEP 3 Scroll to User Preferences and press Select.
STEP 4 Scroll to Bluetooth Configuration and press Select.
STEP 5 Scroll to Bluetooth Mode and press the Right Arrow key to choose one of the
following:
• Handsfree—Your Cisco SPA525G2 operates as a handsfree device with a
Bluetooth-enabled mobile phone.
To Next Page
Loading...
Need help?
General
