Cisco SPA301 User Manual

Cisco SPA IP Phone Field Reference
Phone Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 302
A
Miscellaneous Line Key Settings
Does not apply to the Cisco WIP310.
Parameter Description
Line ID Mapping Specifies the call appearance line ID mapping
when the call appearance per line is set to two.
Applied to both shared line and private lines.
Effective for incoming calls only.
Choose Vertical First or Horizontal First. Each
LED can hold multiple calls and the first call on an
LED makes it light up. Horizontal first means the
second incoming call makes the same line LED
flash. Vertical first means the second incoming
call lights up the next line LED with the same
account.
For example, if Extension 101 is assigned to two
LEDs, and Vertical First is selected, the second
incoming call on Extension 101 lights up the
second LED. The third call makes the first LED
flash, and the fourth call makes the second LED
flash.
If Horizontal First is selected, the second incoming
call on Extension 101 makes the first LED flash.
The third call lights up the second LED, and the
fourth call makes the second LED flash.
SCA Barge-In Enable Enables the SCA Barge-In.
Defaults to no.
SCA Sticky Auto Line
Seize
When enabled, taking the phone off-hook will not
automatically pick up an incoming call on a shared
line.
SCA Unseize Delay Allows shared line unseize delay to be
Configurable. Default is 0.

Cisco SPA301 Specifications

General

Brand	Cisco
Model	SPA301
Category	IP Phone
Language	English