Cisco SPA301 - Ring Tone (Cisco SPA300 Series and Cisco SPA500 Series)

Cisco SPA IP Phone Field Reference
Phone Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 309
A
Ring Tone (Cisco SPA300 Series and Cisco SPA500 Series)
Each entry defines a ring tone to be used on the phone, with an ID between1
and12. The ID can be used in a DirEntry to indicate which ring tone to use when
the corresponding caller calls.
Parameter Description
Ring1 Ring tone script for ring 1. Defaults to n=Classic-1;w=3;c=1.
Ring2 Ring tone script for ring 2. Defaults to n=Classic-2;w=3;c=2.
Ring3 Ring tone script for ring 3. Defaults to n=Classic-3;w=3;c=3.
Ring4 Ring tone script for ring 4. Defaults to n=Classic-4;w=3;c=4.
Ring5 Ring tone script for ring 5. Defaults to n=Simple-1;w=2;c=1.
Ring6 Ring tone script for ring 6. Defaults to n=Simple-2;w=2;c=2.
Ring7 Ring tone script for ring 7. Defaults to n=Simple-3;w=2;c=3.
Ring8 Ring tone script for ring 8. Defaults to n=Simple-4;w=2;c=4.
Ring9 Ring tone script for ring 9. Defaults to n=Simple-5;w=2;c=5.
Ring10 Ring tone script for ring 10. Defaults to n=Office;w=4;c=1.