Customizing Standard Features
Configuring Ring Tones
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 81
3
Configuring On-Demand Ring Tones (Cisco SPA525G or
Cisco SPA525G2)
The Cisco SPA525G or Cisco SPA525G2 support on-demand ring tones; ring
tones are downloaded from a TFTP server and played when a call comes in. To
configure:
STEP 1 Click Admin Login > advanced > Voice > Phone.
STEP 2 Scroll to the Ring Tone section.
STEP 3 In one or more of the ten ring tone fields, enter the following:
n=office;w=[tftp://]host[:port]/path;c=0
Specify the URL to download in the host/port/path field. If the connection
cannot be established, a default ring tone is played.
STEP 4 Click Submit All Changes.
User-Created MP3 Ring Tones (Cisco SPA525G or
Cisco SPA525G2)
A Cisco SPA525G or Cisco SPA525G2 user can create up to two ring tones from
an MP3 audio file stored on a USB memory device. For instructions, see the
Cisco Small Business SPA525G and SPA525G2 SIP IP Phones User Guide,
located on Cisco.com.
Creating and Uploading Ring Tones Using the Ring Tone
Utility (Cisco SPA300 Series and Cisco SPA500 Series only)
To convert a file for use as a ring tone, use the Ring Tone Utility, available at:
https://supportforums.cisco.com/docs/DOC-9944
You must have a .wav file of less than 8 seconds in length saved to your computer.
You can also use a sound editor to create the file with the following restrictions:
• 16-bit PCM mono
• 8000 samples per second
• Less than 6000 ms in length
To Next Page
Loading...
Need help?
General
