Cisco SPA301 User Manual

Cisco SPA IP Phone Field Reference
System Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 250
A
VLAN Settings
Not applicable to the Cisco WIP310.
Primary NTP Server IP address or name of primary NTP server.
Secondary NTP Server IP address or name of secondary NTP server.
Enable Bonjour
(Cisco SPA525G or
Cisco SPA525G2 only)
Enable Bonjour networking that is used by Office
Manager and Cisco Configuration Assistant to
discover the Cisco IP phones. Choose yes to
enable or no to disable.
Parameter Description
Parameter Description
Enable VLAN Choose Ye s to enable VLAN. Choose no to
disable.
VLAN ID If you use a VLAN without CDP (VLAN enabled
and CDP disabled), enter a
VLAN ID for the IP
phone. Note that only voice packets are tagged
with the VLAN ID. Do not use 1 for the VLAN ID.
Enable PC Port VLAN
Tagging
Enables VLAN and priority tagging on the phone
data port (802.1p/q). This feature facilities tagging
of the VLAN ID (802.1Q) and priority bits (802.1p)
of the traffic coming from the PC port of the IP
phone.
Defaults to No. Choose Yes to enable the tagging
algorithm.
PC Port VLAN Highest
Priority
0-7 (default 0). The priority applied to all frames,
tagged and untagged. The phone modifies the
frame priority only if the incoming frame priority is
higher than this value.
PC Port VLAN ID 0-4095 (default 0). Value of the VLAN ID. The
phone tags all the untagged frames coming from
the PC (it will not tag frames with an existing tag).

Cisco SPA301 Specifications

General

Brand	Cisco
Model	SPA301
Category	IP Phone
Language	English