Customizing Standard Features
Configuring Phone Information and Display Settings
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 55
3
Configuring Phone Information and Display Settings
The phone web user interface allows you to customize settings such as the phone
name, background photo, logo, and screen saver.
Configuring the Phone Name
Navigate to Admin Login > advanced > Voice > Phone.
Under General, enter the Station Display Name for the phone. This name displays
on the phone LCD GUI in the top right corner.
Customizing the Startup Screen
You can create a text or 128-by-48 pixel by 1-bit deep image logo to display when
the IP phone boots up. (Not applicable to Cisco WIP310 or the Cisco SPA501G.) A
logo displays during the boot sequence for a short period after the Cisco logo
displays.
To configure a custom logo:
STEP 1 For the Cisco SPA303 and Cisco SPA5XXG, click Admin Login > advanced >
Voice > Phone.
For the Cisco SPA525G or Cisco SPA525G2, click Admin Login > advanced >
Voice > User.
STEP 2 To display a text logo, in the Text Logo field enter text as follows:
• Up to two lines of text
• Each line must be less than 32 characters
• Insert a new line character (\n) and escape code (%0a) between the two
lines
For example, Super\n%0aTelecom displays:
Super
Telecom
• Use the + character to add spaces for formatting. You can add multiple +
characters before and after the text to center it.
To Next Page
Loading...
Need help?
General
