Cisco SPA301 User Manual

Cisco SPA IP Phone Field Reference
Regional Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 285
A
Vertical Service Announcement Codes
• Service Annc (Announcement) Base Number: Defaults to blank.
• Service Annc (Announcement) Extension Codes: Defaults to blank.
Feature Dial Services
Codes (continued
The *codes should not conflict with any of the other
vertical service codes internally processed by the
Cisco SPA9000. You can empty the corresponding
*code that you do not want to Cisco SPA9000 to
process.
You can add a parameter to each *code in Features
Dial Services Codes to indicate what tone to play after
the *code is entered, such as *72‘c‘|*67‘p‘. Below are a
list of allowed tone parameters (note the use of back
quotes surrounding the parameter without spaces)
•c = Cfwd Dial Tone
•d = Dial Tone
•m = MWI Dial Tone
•o = Outside Dial Tone
•p = Prompt Dial Tone
• s = Second Dial Tone
• x = No tones are place, x is any digit not used above
If no tone parameter is specified, the Cisco SPA9000
plays Prompt tone by default.
If the *code is not to be followed by a phone number,
such as *73 to cancel call forwarding, do not include it
in this parameter. In that case, simple add that *code in
the dial plan and the SPA9000 send INVITE *73@..... as
usual when user dials *73.
Parameter Description

Cisco SPA301 Specifications

General

Brand	Cisco
Model	SPA301
Category	IP Phone
Language	English