Cisco SPA301 User Manual

Customizing Standard Features
Configuring Audio Settings
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 85
3
Configuring Audio Settings
You can configure default audio settings for the phone. The volume settings can be
modified by the user by pressing the volume control button on the phone, then
pressing the Save soft button. (Not applicable to the Cisco WIP310.)
To configure the audio volume settings:
STEP 1 Click Admin Login > advanced > Voice > User.
STEP 2 In the Audio Volume section, configure a volume level between 1 and 10, with 1
being the lowest level:
Parameter Description
Ringer Volume Sets the volume for the ringer.
Speaker Volume Sets the volume for the full-duplex
speakerphone.
Handset Volume Sets the volume for the handset.
Headset Volume Sets the volume for the headset.
Bluetooth Volume Sets the volume for the Bluetooth device
(Cisco SPA525G or Cisco SPA525G2 only).
Handset Version Handset Version—Change the handset version
manually.
Auto—Phone automatically sets the handset
version based on the hardware version and
model. (Default)
Original—Handset set to Version 2 and below.
V3—Handset set to Version 3.
Deep Bass Sets a standard tone or an enhanced bass tone.

Cisco SPA301 Specifications

General

Brand	Cisco
Model	SPA301
Category	IP Phone
Language	English