Cisco SPA301 User Manual

Cisco SPA IP Phone Field Reference
Phone Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 313
A
Multiple Paging Group Parameters
You can configure a phone as part of a paging group by using a Group Paging
Script. Users can then direct pages to specific groups of phones. A phone can be
part of no more than two paging groups, and user can page a maximum of five
paging groups.
Syntax:
[pggrp=ip-address:port;[name=xxx;]num=xxx;
[listen={yes|no}]];
Where:
IP address : Multicast IP address of the phone that listens for and receives pages.
port : Port on which to page; you must use different ports for each paging group.
name (optional): The name of the paging group. In this name, do not use the pggrp
string because it is reserved. Using it causes the script not to work, as in these
examples:
pggrp=224.168.168.168:3141;name=ITGPgGrp;
num=800;listen=yes;
pggrp=224.168.168.168:3141;name=PgGrp;num=800;listen=yes;
Headset Additional Input
Gain
Applies additional input gain to the headset. The
maximum value is 9.
NOTE Does not apply to the Cisco SPA525G or
Cisco SPA525G2, or the Cisco SPA501G.
Speakerphone Additional
Input Gain
Applies additional input gain to the speakerphone.
The maximum value is 9.
NOTE Does not apply to the Cisco SPA301 or
Cisco SPA525G or Cisco SPA525G2 or
Cisco SPA501G.
Bluetooth Additional Input
Gain (Cisco SPA525G or
Cisco SPA525G2 only)
Applies additional input gain to the Bluetooth
device.
Defaults to zero. The maximum value is 9.
Parameter Description

Cisco SPA301 Specifications

General

Brand	Cisco
Model	SPA301
Category	IP Phone
Language	English