Provisioning
Manually Provisioning a Phone from the Keypad
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 177
6
Cisco WIP310
STEP 1 Press Select to choose Settings and press Select again.
STEP 2 Navigate to Misc Settings.
STEP 3 Navigate to profile rule. Enter the profile rule in the following format:
protocol://server[:port]/profile_pathname
For example, to have the Cisco WIP310 provisioning done by a Cisco SPA9000,
enter:
192.168.2.64/cfg/generic.xml
STEP 4 Press the Resync softkey.
Cisco SPA525G or Cisco SPA525G2
STEP 1 Press the Setup button.
STEP 2 Navigate to Device Administration and press Select.
STEP 3 Scroll to Profile Rule and press Select.
STEP 4 Enter the profile rule by using the following format.
protocol://server[:port]/profile_pathname
For example:
tftp://192.168.1.5/spa525.cfg
STEP 5 Press the Resync softkey.
Sample Configuration File
Following is a sample configuration file:
Set_Local_Date_(mm/dd) "" ;
Set_Local_Time_(HH/mm) "" ;
Time_Zone "GMT-07:00" ; # options: GMT-12:00/GMT-11:00/GMT-10:00/GMT-09:00/
GMT-08:00/GMT-07:00/GMT-06:00/GMT-05:00/GMT-04:00/GMT-03:30/GMT-03:00/GMT-
02:00/GMT-01:00/GMT/GMT+01:00/GMT+02:00/GMT+03:00/GMT+03:30/GMT+04:00/
GMT+05:00/GMT+05:30/GMT+05:45/GMT+06:00/GMT+06:30/GMT+07:00/GMT+08:00/
GMT+09:00/GMT+09:30/GMT+10:00/GMT+11:00/GMT+12:00/GMT+13:00
To Next Page
Loading...
Need help?
General
