Cisco SPA IP Phone Field Reference
Phone Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 301
A
Line Key
When used in the configuration profile, parameters in this section must be
appended with
n
, where
n
represents line 1, 2, 3, 4, 5 or 6. For more information on
these parameters, see Configuring Lines.
NOTE Does not apply to the Cisco WIP310.
Parameter Description
Extension Extension number of the line key.
Short Name A short label shown on the IP phone screen for
Line Key 1 through Line Key 6.
Share Call Appearance Yes indicates that Line Key 1/2/3/4/5/6 is a
shared call appearance. Otherwise this call
appearance is not shared (it is private).
Defaults to no.
Extended Function Use to assign Busy Lamp Field, Call Pickup, and
Speed Dial Functions to Idle Lines on the IP
phone.
Syntax is:
fnc=type;sub=stationname@$PROXY;ext
=extension#@$PROXY
where:
• fnc: function
• blf: busy lamp field
• cp: call pickup
• sub: station name (not needed for speed
dial)
• ext or usr: extension or user (the usr and ext
keywords are interchangeable)
NOTE Not applicable to the Cisco WIP310,
Cisco SPA301, or Cisco SPA501G.
To Next Page
Loading...
Need help?
General
