Cisco SPA301 User Manual

Cisco SPA IP Phone Field Reference
Attendant Console Tab (Cisco SPA500 and Cisco SPA500DS)
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 361
A
Attendant Key LED Patterns
The configuration for the attendant key LED patterns is the same as the line key
LED script described in Chapter 9, “Configuring LED Patterns.”
BXfer to Starcode Enable When set to yes, the phone performs a blind
transfer when the *code is defined in a speed dial
extended function,. If set to no, the current call is
held and a new call is started to the speed dial
destination.
BXfer on Speed Dial
Enable
When set to yes, the phone performs a blind
transfer when the speed dial function key is
selected. When set to no, the current connected
call is held and a new call to the speed dial
destination is started.
For example, when a user parks a call using the
speed dial function, if the parameter is enabled, a
blind transfer is performed to the parking lot. If the
parameter is not enabled, an attended transfer is
performed to the parking lot.
Unit 1/2 Key 1-32
(SPA500S)
Unit 1/2 Key 1-30
(SPA500DS)
Enter a strings that define the extension and other
parameters associated with each lighted button
on the first Cisco Attendant Console. Keywords
and values are case-sensitive.
Parameter Description
Parameter Description
Application LED Extended applications (for example, speed dial,
xml, mp3, weather, news) are ready for use.
Serv Subscribe Failed LED BLF service subscription failed.
Serv Subscribing LED BLF service subscription is on proceeding.
SNRM Day Mode LED (Used with Cisco UC320W.) The System Night
Ringing Mode (SNRM) is turned off. The system is
in day mode.

Cisco SPA301 Specifications

General

Brand	Cisco
Model	SPA301
Category	IP Phone
Language	English