Cisco SPA301 User Manual

Configuring Lines
Configuring Basic or Advanced Call Park Function to a Line Key
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 52
2
STEP 4 In the Call Progress Tones section under the Call Pickup Tone parameter.
The default value is 440@-10;30(.3/9.7/1), same as the call waiting tone.
To configure this parameter by using the configuration file, configure the following
line the profile:
<Call_Pickup_Tone ua="na">440@-10;30(.3/9.7/1)</Call_Pickup_Tone>
STEP 5 Click Submit All Changes.
Configuring Basic or Advanced Call Park Function to a Line
Key
Unused line keys can be enabled to allow call park (for the MetaSwitch soft
switch) on the Cisco SPA300 and SPA500 series phones. Users can press this line
button to park a call or retrieve a parked call.
NOTE Not available for WIP310, SPA501, SPA502, and SPA301 phones.
• BroadSoft Advanced Call Park and Recall Support, page 45
• MetaSwitch Call Park Function Support
For example to configure unused line keys for call park and retrieval on Cisco SPA
525G/SPA525G2 (MetaSwitch):
STEP 1 Click Admin Login > advanced > Voice > Att(endant) Console.
STEP 2 In the General section under Server Type, choose RFC3265_4236.
STEP 3 Click the Phone tab.
STEP 4 Choose the line key to configure (line 5 in this example):
a. From the Extension drop down list, choose Disabled.
b. From the Share Call Appearance drop-down list, choose private.
c. Enter the following string in the Extended Function field:
fnc=prk;sub=05@domain.com

Cisco SPA301 Specifications

General

Brand	Cisco
Model	SPA301
Category	IP Phone
Language	English