Configuring Lines
Configuring Basic or Advanced Call Park Function to a Line Key
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 53
2
where:
- fnc: function
- prk: call park
- sub: call park orbit, or location where the call is parked. Valid value range
is from 01 through 10. In this example, 5 is used.
- domain.com: phone domain, usually the same as the proxy value in the
Ext 1 tab. You can also use fnc=prk;sub=05@$PROXY to set this value.
STEP 5 Click Submit All Changes.
To Next Page
Loading...
