Configuring Regional Parameters and Supplementary Services
Vertical Service Announcement Codes (Cisco SPA300 Series and Cisco SPA500 Series)
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 204
7
Vertical Service Announcement Codes (Cisco SPA300 Series
and Cisco SPA500 Series)
The Cisco SPA300 Series and Cisco SPA500 Series IP phones support all services
that can be activated on a phone (call forward, do not disturb, and so on). Vertical
service announcement codes apply only when the user dials the corresponding
star code.
Following is an example of how you can use these fields:
<Service Annc Base Number> = 1234
<Service Annc Extension Codes>=
"CWT:00;CWF:01;FAT:02;FAF:05;FBT:03;FBF:05;FNT:04;FNF:05;"
Here CWT: Call waiting service enabled;
CWF: Call waiting service disabled;
FAT: Call forward all service enabled;
FAF: Call forward all service disabled;
FBT: Call forward busy service enabled;
FBF: Call forward busy service disabled;
FNT: Call forward no answer enabled;
FNF: Call forward no answer disabled;
When the user enables call waiting service, the IP phone automatically calls
123400@$proxy.
When the user
disables
the call waiting service, IP phone connects to
123401@$proxy.
If the <Service Annc Extension Codes> do not define CWT/CWF extension codes,
the IP phone defaults to normal.
Bonus Services Announcement Description
When the user enables the callback service using the *code, the IP phone
automatically calls 123400@$proxy.
When the user disables the callback service using the *code, the IP phone
automatically connects to the 123401@$proxy.
If the
Service Annc Extension Codes
do not define CBT/CBF extension codes, the
IP phone does not use this feature.
[Line1/2]<Service Announcement Serv> = Yes
[Regional]<Service Annc Base Number> = {announcement server base number}
[Regional]<Service Annc Extension Codes> = {SAEC Script}
SAEC Script format:{SA_map;}* Here * means 0 or multiple
SA_map syntax:
SA_serv=SA_extcode
To Next Page
Loading...
Need help?
General
