Cisco SPA301 User Manual

Cisco SPA IP Phone Field Reference
Attendant Console Status
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 363
A
Attendant Console Status
This page provides two tabs to display the status of up to two Cisco Attendant
Consoles that are supported by a single IP phone:
• Unit 1—Displays information about the first Cisco Attendant Console.
• Unit 2—Displays information about the second Cisco Attendant Console.
Each tab provides the read-only fields described in the following table:
Parameter Description
Unit Enable Indicates that the Cisco Attendant Console is
enabled or disabled.
Subscribe Expires When the current subscription expires. After the
subscription expires, the Cisco Attendant
Console automatically requests a new
subscription.
HW Version Version of the hardware.
Unit Online Indicates that the Cisco Attendant Console is
powered on and connected.
Subscribe Retry Interval Length of time the Cisco Attendant Console waits
to try again if subscription fails.
SW Version Version of the software.
Key Key number on the attendant console.
Name Name assigned to each key.
Type Function enabled for each key.
Line Extension assigned to each key.
Station Displays the subscribe URI configured for each
key.
Subscribed Subscription status of the unit/key. The value can
be Yes, Fail, or N/A. N/A indicates that the feature/
function (fnc) of that line does not require a
subscription (such as a speed dial).

Cisco SPA301 Specifications

General

Brand	Cisco
Model	SPA301
Category	IP Phone
Language	English