Cisco SPA301 User Manual

Cisco SPA IP Phone Field Reference
Phone Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 303
A
Line Navigation
(Does not apply to the
Cisco SPA525G or
Cisco SPA525G2.)
This parameter controls the way that the IP phone
navigates between call appearances when the
user presses the up or down navigation button.
The default value is “per line.”
When Per Call is configured, and the user
presses the up and down navigation button, the
phone displays each call for a line before moving
to subsequent lines. For example, if there are two
calls on Line 1, pressing the up or down navigation
button scrolls between the two calls first, before
moving to display any calls that are on Line 2. We
recommend you enable programmable softkeys
when choosing this option.
When Per Line is configured, and the user
presses the up and down navigation button, the
phone displays one call appearance for a line,
before moving to the next line. For example, if
there are two calls on Line 1, pressing the up or
down navigation button moves directly to display
any calls on Line 2 (rather than the second call on
Line 1).
Parameter Description

Cisco SPA301 Specifications

General

Brand	Cisco
Model	SPA301
Category	IP Phone
Language	English