EasyManuals Logo

Cisco SPA301 User Manual

Cisco SPA301
371 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #304 background imageLoading...
Page #304 background image
Cisco SPA IP Phone Field Reference
Phone Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 304
A
Call Appearance Per Line This parameter allows you to choose the number
of calls per line button. You can choose a value
from 2 (the default) to 10.
When you increase the number of calls per line to
a value greater than 2, the phone automatically
sets the Line ID Mapping option to Horizontal
First. Changing the Line ID Mapping value has no
effect if the value of the Call Appearance Per Line
setting is greater than 2.
NOTE The maximum number of calls per an SPA525G
or 525G2 phone is 10. When the maximum numbers of
calls per phone is reached, the phone does not allow
you to make a new call and rejects incoming calls.
This parameter is not supported on the
Cisco SPA501G and Cisco SPA301 phones. Also,
this parameter is only supported when the
phones are operating in the SIP mode. In version
7.4.8a, only private call appearances are
supported. In versions 7.5.1a and higher private
and shared call appearances are supported.
Softkey Navigation Style If scrollable is chosen, users must use the
navigation button on the IP phone to scroll to see
the additional softkeys. If more is chosen, a
More softkey is displayed, which, when pressed,
displays the additional softkeys.
NOTE The Cisco SPA525G and Cisco SPA525G2
always display the “More” softkey when in an idle state.
Parameter Description

Table of Contents

Other manuals for Cisco SPA301

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco SPA301 and is the answer not in the manual?

Cisco SPA301 Specifications

General IconGeneral
BrandCisco
ModelSPA301
CategoryIP Phone
LanguageEnglish

Related product manuals