Configuring Security, Quality, and Network Features
Configuring Voice Codecs
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 153
5
Release Unused
Codec
To enable the release of codecs not used after codec
negotiation on the first call so that other codecs can be
used for the second line, select yes. Otherwise, select no.
Defaults to yes.
DTMF Process
AV T
Processes RTP DTMF events. When yes DTMF is relayed
by using Named Telephony Events (NTEs) in Real-Time
Transport Protocol (RTP) packets (RFC-2833, RTP Payload
for DTMF Digits, Telephony Tones and Telephony Signals).
Defaults to yes.
Silence Supp
Enable
To enable silence suppression so that silent audio frames
are not transmitted, select yes. Otherwise, select no.
Defaults to no.
DTMF Tx Method The method for transmitting DTMF signals to the far end.
The options are: InBand, audio video transport (AVT), INFO,
Auto, InBand+INFO, or AVT+INFO.
• InBand sends DTMF by using the audio path.
• AVT sends DTMF as AVT events.
• INFO uses the SIP INFO method.
• Auto uses InBand or AVT based on the outcome of
codec negotiation.
Defaults to Auto.
Parameter Description
To Next Page
Loading...
Need help?
General
