Provisioning
Using TR-069
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 189
6
ACS Password Enter the password grants access to the ACS for this user.
This password is used only for HTTP-based authentication
of the CPE.
ACS URL In Use Displays the ACS URL.
Connection
Request URL
Displays the ACS making the connection request to the
CPE.
Connection
Request
Username
Enter the username that authenticates the ACS making the
connection request to the CPE.
Connection
Request
Password
Enter the password used to authenticate the ACS making a
connection request to the CPE.
Periodic Inform
Interval
The duration in seconds of the interval between CPE
attempts to connect to the ACS when Periodic Inform
Enable is set to yes.
Periodic Inform
Enable
From the drop-down menu, select yes to enable CPE
connection requests. Enter no to disable connection
requests.
TR-069
Traceability
From the drop-down menu, select yes to enable TR-069
transaction traceability. Enter no to disable traceability.
CWMP V1.2
Support
From the drop-down menu, select yes to enable CPE WAN
Management Protocol (CWMP) support. Enter no to disable
CWMP support such that the device does not send any
Inform messages to the ACS or accept any connection
requests from the ACS.
TR-069
VoiceObject Init
From the drop-down menu, select yes to initialize all voice
objects to factory default values. Enter no to retain the
current values.
TR-069 DHCP
Option Init
From the drop-down menu, select yes to initialize the DHCP
settings from the ACS. Enter no to leave the settings
unchanged.
TR-069 IGD
Support
From the drop-down menu, select yes to enable TR-069 on
the Internet Gateway Device (IGD). Enter no to disable
traceability. (This is used for debugging purposes.)
Field Description
To Next Page
Loading...
