Cisco SPA301 User Manual

Getting Started
Using the Web-Based Configuration Utility
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 24
1
STEP 1 Press the Setup button.
STEP 2 To display the Web Server Writable option, select Settings > Security
Configuration > Web Server Writable.
NOTE This option is available in SPCP mode only.
STEP 3 To change the status of the Web Server Writable, press Edit.
STEP 4 Press Y/ N to toggle the parameter and press OK to set the parameter.
STEP 5 To save your change, press Save.
Cisco SPA501G
To allow or disallow from the phone viewing of the phone web user interface by
using the IVR:
STEP 1 Press the Setup button on the phone. The configuration menu is announced.
STEP 2 In the IVR menu, enter 7932.
STEP 3 Press 1 to enable the web server, then press #.
STEP 4 To save the configuration, press 1; to review, press 2; to re-enter, press 3; to exit,
press *.
Cisco SPA525G or Cisco SPA525G2
To view the phone parameters by using the phone web user interface, the phone
web server must be enabled. Your system administrator might have disabled the
phone option to make the phone web user interface viewable or writable.
To allow or disallow from the phone viewing of the phone web user interface:
STEP 1 Press Setup.
STEP 2 To display the Web Server Writable option, select Settings > Network
Configuration > Web Server.

Cisco SPA301 Specifications

General

Brand	Cisco
Model	SPA301
Category	IP Phone
Language	English