Cisco SPA IP Phone Field Reference
SIP Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 256
A
Escape Display Name Lets you keep the Display Name private. Select
yes if you want the IP phone to enclose the string
(configured in the Display Name) in a pair of
double quotes for outbound SIP messages. Any
occurrences of or \ in the string is escaped with \
and \\ inside the pair of double quotes. Otherwise,
select no.
Defaults to yes.
Escape Special Character Normally, the IP phone sends a “%23” (escape) as
part of the message when the special character #
is included in the SIP INVITE message. This can
cause problem s with some telephony servers
that need to receive the # character. When this
parameter is set to yes, the phone sends a “%23”
(escape) as part of the message when the # is
included. When set to no, the # is sent directly and
the escape (%23) is not used.
Defaults to yes.
SIP-B Enable Enables SIP for Business (supports Sylantro call
flows) call features.
Talk Package Enables support for the BroadSoft Talk Package,
which enables a user to answer or resume a call
by clicking a button in an external application.
Hold Package Enables support for the BroadSoft Hold Package,
which enables a user to place a call on hold by
clicking a button in an external application.
Conference Package Enables support for the BroadSoft Conference
Package, which enables a user to start a
conference by clicking a button in an external
application.
Notify Conference If enabled, the unit will send out a NOTIFY with
event=conference when starting a conference.
Parameter Description
To Next Page
Loading...
Need help?
General
