Cisco SPA301 User Manual

Cisco SPA IP Phone Field Reference
Regional Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 287
A
Force G722 Code Makes this codec the only codec that can be used for
the associated call.
Defaults to *02722.
Only one G.722 call at a time is allowed. If a conference
call is placed, a SIP re-invite message is sent to switch
the calls to narrowband audio.
NOTE Not supported on the Cisco WIP310.
Prefer L16 Code Makes this codec the only codec that can be used for
the associated call.
Defaults to *01016.
Force L16 Code Makes this codec the only codec that can be used for
the associated call.
Defaults to *02016.
Prefer G723 Code Makes this codec the preferred codec for the
associated call.
Defaults to *01723.
NOTE Not applicable to Cisco WIP310, Cisco SPA525G
or Cisco SPA525G2.
Force G723 Code Makes this codec the only codec that can be used for
the associated call.
Defaults to *02723.
NOTE Not applicable to Cisco WIP310, Cisco SPA525G
or Cisco SPA525G2.
Prefer G726r16 Code Makes this codec the preferred codec for the
associated call.
Defaults to *0172616.
NOTE Not applicable to Cisco WIP310, Cisco SPA525G
or Cisco SPA525G2.
Parameter Description

Cisco SPA301 Specifications

General

Brand	Cisco
Model	SPA301
Category	IP Phone
Language	English