Getting Started
Viewing Phone Information
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 28
1
The following is a list of the supported reboot/refresh reasons (Cisco SPA525G or
Cisco SPA525G2):
Provisioning The reboot was the result of changes made to
parameter values by using the IP phone screen or
phone web user interface, or as a result of
synchronization.
SIP Triggered The reboot was triggered by a SIP request.
Link Down The reboot was triggered when the link to the
network went down.
VLAN Changed The reboot was triggered when the VLAN was
changed.
RC The reboot was triggered as a result of remote
customization.
User Triggered The user manually triggered a warm reboot.
Software Req The warm reboot was triggered by a remote server.
System n The reboot was triggered by system events (for
example, running out of resources).
IP Changed The reboot was triggered after the phone IP address
was changed.
Reason Description
Reason Description
Upgrade The reboot was a result of an upgrade operation
(regardless whether the upgrade completed or
failed).
Provisioning The reboot was the result of changes made to
parameter values via the IP phone screen or phone
web user interface, or as a result of synchronization.
SIP Triggered The reboot was triggered by a SIP request.
RC The reboot was triggered as a result of remote
customization.
To Next Page
Loading...
Need help?
General
