Cisco SPA IP Phone Field Reference
Phone Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 296
A
Text Logo Text logo to display when the phone boots up. A
service provider, for example, can enter logo text
as follows:
• Up to 2 lines of text
• Each line must be fewer than 32 characters
• Insert a new line character (\n) between
lines
• Insert escape code %0a
For example, Super\n%0aTelecom displays:
Super
Telecom
Use the + character to add spaces for formatting.
For example, you can add multiple + characters
before and after the text to center it.
NOTE Not applicable to the Cisco WIP310,
Cisco SPA301, or Cisco SPA501G. On the
Cisco SPA525G or Cisco SPA525G2, this setting is
located on the User tab.
BMP Picture Download
URL
URL locating the bitmap (.BMP) file to display on
the IP phone screen background.
For more information, see Configuring Phone
Information and Display Settings.
NOTE Not applicable to the Cisco WIP310,
Cisco SPA301, or Cisco SPA501G. On the
Cisco SPA525G or Cisco SPA525G2, this setting is
located on the User tab.
Select Logo Select from Default, BMP Picture, Text Logo, or
None.
Defaults to Default.
NOTE Not applicable to the Cisco WIP310,
Cisco SPA301, or Cisco SPA501G. On the
Cisco SPA525G or Cisco SPA525G2, this setting is
located on the User tab.
Parameter Description
To Next Page
Loading...
