Cisco SPA301 User Manual

Cisco SPA IP Phone Field Reference
Phone Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 298
A
Screen Saver Enable Enables a screen saver on the IP phone screen.
When the phone is idle for a specified time, it
enters screen saver mode. (Users can set up
screen savers directly using phone Setup button.)
When the screen saver is active, the screen
shows “Press any key to unlock your phone.”
User input is accepted if the screen saver is active
(for example, if a user begins to dial a number
while the screen saver is active, the key press is
accepted). If the phone LCD is displaying the
Home screen and the screen saver becomes
active, and if there are no active calls, the
following events generated by user input are
passed to the Home screen:
• Numeric keys
• Line keys
• Speaker key
• Headset key
• Mail Box key
• Handset off hook
All other key events are not passed.
NOTE Not applicable to the Cisco WIP310,
Cisco SPA301, or Cisco SPA501G. On the
Cisco SPA525G or Cisco SPA525G2, this setting is
located on the User tab.
Screen Saver Wait Amount of idle time before screen saver displays.
NOTE Not applicable to the Cisco WIP310,
Cisco SPA301, or Cisco SPA501G. On the
Cisco SPA525G or Cisco SPA525G2, this setting is
located on the User tab.
Parameter Description

Cisco SPA301 Specifications

General

Brand	Cisco
Model	SPA301
Category	IP Phone
Language	English