Cisco SPA IP Phone Field Reference
Phone Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 306
A
Local Active LED The call appearance is engaged in an active call.
Leaving this entry blank indicates the default
value of c=r.
Remote Active LED Another station is engaged in an active call on this
shared call appearance. Not applicable is this call
appearance is not shared. Leaving this entry blank
indicates the default value of c=r;p=d.
Local Held LED The call appearance is held by this phone.
Leaving this entry blank indicates the default
value of c=r;p=s.
Remote Held LED Another phone has placed this call appearance
on hold. Not applicable if the call appearance is
not shared. Leaving this entry blank indicates the
default value of c=r,p=s.
Register Failed LED The corresponding extension has failed to
register with the proxy server. Leaving this entry
blank indicates the default value of c=a.
Disabled LED The Call Appearance is disabled (not available for
any incoming or outgoing call). Leaving this entry
blank indicates the default value of c=o.
Registering LED The corresponding extension is trying to register
with the proxy server. Leaving this entry blank
indicates the default value of c=r;p=s.
Call Back Active LED Call Back operation is currently active on and this
call appearance is not shared. Leaving this entry
blank indicates the default value of c=r;p=s.
Trunk In-Use LED A shared trunk is in use.
Trunk No Service LED A shared trunk is not in service.
Trunk Reserved LED A shared trunk has been reserved.
Parameter Description
To Next Page
Loading...
Need help?
General
