Cisco SPA IP Phone Field Reference
Ext Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 345
A
G723 Enable To enable the use of the G.723a codec at 6.3 kbps,
select yes. Otherwise, select no.
Defaults to yes.
NOTE G.723 is not supported on the Cisco SPA300 Series,
Cisco SPA500 Series, or Cisco WIP310.
G726-16 Enable To enable the use of the G.726 codec at 16 kbps,
select yes. Otherwise, select no.
Defaults to yes.
NOTE Not supported on the Cisco SPA525G or
Cisco SPA525G2.
G726-24 Enable To enable the use of the G.726 codec at 24 kbps,
select yes. Otherwise, select no.
Defaults to yes.
NOTE Not supported on the Cisco SPA525G or
Cisco SPA525G2 or
Cisco WIP310.
L16 Enable To enable the use of the L16 codec, select yes.
Otherwise, select no.
Defaults to yes.
NOTE Cisco SPA525G or Cisco SPA525G2 only.
G726-32 Enable To enable the use of the G.726 codec at 32 kbps,
select yes. Otherwise, select no.
Defaults to yes.
G726-40 Enable To enable the use of the G.726 codec at 40 kbps,
select yes. Otherwise, select no.
Defaults to yes.
NOTE Not applicable to the Cisco SPA525G or
Cisco SPA525G2.
Parameter Description