Cisco SPA IP Phone Field Reference
Ext Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 349
A
Parameter Description
Dial Plan Dial plan script for this line.
The default is (<9:>xx.)
(*xx|[3469]11|0|00|[2-
9]xxxxxx|1xxx[2-
9]xxxxxxS0|xxxxxxxxxxxx.)
The dial plan syntax is expanded in the Cisco SPA
IP phones to allow the designation of three
parameters to be used with a specific gateway:
• uid— authentication user-id
• pwd—authentication password
• nat— if this parameter is present, use NAT
mapping
Each parameter is separated by a semi-colon (;).
Caller ID Map Inbound caller ID numbers can be mapped to a
different string. For example, a number that begins
with +44xxxxxx can be mapped to 0xxxxxx. This
feature has the same syntax as the Dial Plan
parameter. With this parameter, you can specify
how to map a caller ID number for display on
screen and recorded into call logs. (Not applicable
to Cisco WIP310.)
Enable IP Dialing Enable or disable IP dialing.
Defaults to no.