Cisco SPA IP Phone Field Reference
TR-069 Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 365
A
TR-069
Traceability
From the drop-down menu, select yes to enable TR-069
transaction traceability. Enter no to disable traceability.
CWMP V1.2
Support
From the drop-down menu, select yes to enable CPE WAN
Management Protocol (CWMP) support. Enter no to disable
CWMP support such that the device does not send any
Inform messages to the ACS or accept any connection
requests from the ACS.
TR-069
VoiceObject Init
From the drop-down menu, select yes to initialize all voice
objects to factory default values. Enter no to retain the
current values.
TR-069 DHCP
Option Init
From the drop-down menu, select yes to initialize the DHCP
settings from the ACS. Enter no to leave the settings
unchanged.
TR-069 IGD
Support
From the drop-down menu, select yes to enable TR-069 on
the Internet Gateway Device (IGD). Enter no to disable
traceability. (This is used for debugging purposes.)
TR-069 Fallback
Support
From the drop-down menu, select yes to enable TR-069
fallback support. Enter no to disable fallback support. If the
SPA phone first attempt to discover the ACS by using DHCP,
it attempts to use DNS to resolve ACS IP address.
TR-069 DHCP
Inform Timer
Enter the interval in seconds that the phone should poll the
DHCP server.
BACKUP ACS
URL
Enter the backup URL of the ACS using the CPE WAN
Management Protocol. This parameter must be in the form
of a valid HTTP or HTTPS URL. The host portion of this URL
is used by the CPE to validate the ACS certificate when
using SSL or TLS.
BACKUP ACS
User
Enter the backup username that authenticates the CPE to
the ACS by using the CPE WAN Management Protocol. This
username is used only for HTTP-based authentication of the
CPE.
BACKUP ACS
Password
Enter the backup password grants access to the ACS for
the backup user. This password is used only for HTTP-
based authentication of the CPE.
Field Description
To Next Page
Loading...
