Cisco TelePresence SX80 Administrator's Guide

D15328.04 SX80 Administrator Guide CE8.2, OCTOBER 2016. www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
107
Cisco TelePresence SX80 Administrator Guide
FacilityService settings
FacilityService Service [1..5] Type
Up to five different facility services can be supported simultaneously. With this setting you
can select what kind of services they are. A facility service is not available unless both the
FacilityService Service [n] Name and the FacilityService Service [n] Number settings are
properly set. Only FacilityService Service [1] with Type Helpdesk is available on the Touch
controller.
Requires user role: ADMIN
Default value: Helpdesk
Value space: Other/Concierge/Helpdesk/Emergency/Security/Catering/Transportation
Other: Select this option for services not covered by the other options.
Concierge: Select this option for concierge services.
Helpdesk: Select this option for helpdesk services.
Emergency: Select this option for emergency services.
Security: Select this option for security services.
Catering: Select this option for catering services.
Transportation: Select this option for transportation services.
FacilityService Service [1..5] Name
Define the name of the facility service. Up to five different facility services are supported.
A facility service is not available unless both the FacilityService Service [n] Name and the
FacilityService Service [n] Number settings are properly set. Only FacilityService Service [1]
is available on the Touch controller. The name will show on the facility service call button,
which appears when you tap the question mark icon in the top bar.
Requires user role: ADMIN
Default value: Service 1: "Live Support" Other services: ""
Value space: String (0, 1024)
The name of the facility service.
FacilityService Service [1..5] Number
Define the number (URI or phone number) of the facility service. Up to five different facility
services are supported. A facility service is not available unless both the FacilityService
Service [n] Name and the FacilityService Service [n] Number settings are properly set. Only
FacilityService Service [1] is available on the Touch controller.
Requires user role: ADMIN
Default value: ""
Value space: String (0, 1024)
The number (URI or phone number) of the facility service.
FacilityService Service [1..5] CallType
Define the call type for each facility service. Up to five different facility services are
supported. A facility service is not available unless both the FacilityService Service [n] Name
and the FacilityService Service [n] Number settings are properly set. Only FacilityService
Service [1] is available on the Touch controller.
Requires user role: ADMIN
Default value: Video
Value space: Video/Audio
Video: Select this option for video calls.
Audio: Select this option for audio calls.
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices

System settings

Cisco TelePresence SX80 Specifications

General

Maximum frame rate	60 fps
Supported video modes	720p, 1080p
Video formats supported	H.261, H.262, H.263, H.264, H.265
Supported graphics resolutions	1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Voice codecs	G.711, G.722, G.722.1, G.729ab
Noise reduction	Yes
HDMI ports quantity	5
DVI-D ports quantity	1
USB 2.0 ports quantity	2
Product color	Silver
Rack capacity	1U
Number of persons	0 person(s)
Analog signal format system	NTSC, PAL
Security algorithms	HTTPS, SSH
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Supported network protocols	SIP, H.323, ISDN, TCP/IP, DHCP, QoS
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Sensor type	-
Image sensor size	- \

Weight and Dimensions

Depth	309.8 mm
Width	442 mm
Height	44 mm
Weight	3650 g