Cisco TelePresence SX80 - Calling more than One

D15328.04 SX80 Administrator Guide CE8.2, OCTOBER 2016. www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
167
Cisco TelePresence SX80 Administrator Guide
Place a call using the web interface (page 2 of 2)
Sign in to the web interface and navigate to Call Control.
Mute the microphone
Click Microphone: On to mute the microphone.
Then the text changes to Microphone: Off.
Click Microphone: Off to unmute.
Volume up
Volume down
Calling more than one
A point-to-point video call (a call involving two parties only) can
be expanded to include one more participant on audio-only.
If your system is using the optional built-in MultiSite feature, up
to five participants, yourself included, can join the video call
(conference). In addition, one more participant can join on audio-
only.
Follow the same procedure to call the next conference participant
as you did when calling the first participant.
Calling more than one using a conference bridge (CUCM ad hoc
conferencing) is not supported from the web interface, even if it is
supported by the video system itself.
Adjust the volume
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices

Appendices