Cisco TelePresence SX80 Administrator's Guide

D15328.04 SX80 Administrator Guide CE8.2, OCTOBER 2016. www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
182
Cisco TelePresence SX80 Administrator Guide
User documentation for the Cisco TelePresence products is
available at ► http://www.cisco.com/go/telepresence/docs
Choose a product category in the right pane until you find
the correct product. This is the path you have to follow:
Collaboration Room Endpoints >
TelePresence SX Series >
TelePresence SX Series
Alternatively, use the following short-link to find the
documentation: ► http://www.cisco.com/go/sx-docs
The documents are organized in the following categories:
Install and Upgrade > Install and Upgrade Guides
• Installation guides: How to install the product
• Getting started guide: Initial configurations required to
get the system up and running
• RCSI guide: Regulatory compliance and safety
information
Maintain and Operate > Maintain and Operate Guides
• Getting started guide: Initial configurations required to
get the system up and running
• Administrator guide: Information required to administer
your product
• Deployment guide for TelePresence endpoints on
CUCM: Tasks to perform to start using the video system
with the Cisco Unified Communications Manager
(CUCM)
Maintain and Operate > End-User Guides
• User guides: How to use the product
• Quick reference guides: How to use the product
• Physical interface guide: Details about the codec’s
physical interface, including the connector panel and
LEDs.
Reference Guides > Command references
• API reference guides: Reference guide for the
Application Programmer Interface (API)
Reference Guides > Technical References
• CAD drawings: 2D CAD drawings with measurements
Configure > Configuration Guides
• In-room control guide: How to design an in-room
control panel, and how to use the video system’s API to
program the in-room controls
• CE Console user guide: How to use the CE Console
application, which provides a graphical interface to
advanced customizable features of the codec
Design > Design Guides
• Video conferencing room guidelines: General guidelines
for room design and best practice
• Video conferencing room guidelines: Things to do to
improve the perceived audio quality
Software Downloads, Release and General Information >
Licensing Information
• Open source documentation: Licenses and notices for
open source software used in this product
Software Downloads, Release and General Information >
Release Notes
• Software release notes
User documentation on the Cisco web site
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices

Appendices

Cisco TelePresence SX80 Specifications

General

Maximum frame rate	60 fps
Supported video modes	720p, 1080p
Video formats supported	H.261, H.262, H.263, H.264, H.265
Supported graphics resolutions	1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Voice codecs	G.711, G.722, G.722.1, G.729ab
Noise reduction	Yes
HDMI ports quantity	5
DVI-D ports quantity	1
USB 2.0 ports quantity	2
Product color	Silver
Rack capacity	1U
Number of persons	0 person(s)
Analog signal format system	NTSC, PAL
Security algorithms	HTTPS, SSH
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Supported network protocols	SIP, H.323, ISDN, TCP/IP, DHCP, QoS
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Sensor type	-
Image sensor size	- \

Weight and Dimensions

Depth	309.8 mm
Width	442 mm
Height	44 mm
Weight	3650 g