D15328.04 SX80 Administrator Guide CE8.2, OCTOBER 2016. www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
111
Cisco TelePresence SX80 Administrator Guide
H323 NAT Address
Define the external/global IP address to the router with NAT support. Packets sent to the
router will then be routed to the system. Note that NAT cannot be used when registered to
a gatekeeper.
In the router, the following ports must be routed to the system's IP address:
* Port 1720
* Port 5555-6555
* Port 2326-2487
Requires user role: ADMIN
Default value: ""
Value space: String (0, 64)
A valid IPv4 address or IPv6 address.
H323 PortAllocation
This setting affects the H.245 port numbers used for H.323 call signaling.
Requires user role: ADMIN
Default value: Dynamic
Value space: Dynamic/Static
Dynamic: The system will allocate which ports to use when opening a TCP connection.
The reason for doing this is to avoid using the same ports for subsequent calls, as some
firewalls consider this as a sign of attack. When Dynamic is selected, the H.323 ports
used are from 11000 to 20999. Once 20999 is reached they restart again at 11000.
The ports are automatically selected by the system within the given range. Firewall
administrators should not try to deduce which ports are used when, as the allocation
schema within the mentioned range may change without any further notice.
Static: When set to Static the ports are given within a static predefined range [5555-
6555].
To Next Page
Loading...
Need help?
General
Weight and Dimensions
